Skip to content
CLASS 11 • ECONOMICS • CHAPTER 3

Organisation of Data

Explore the published notes, key concepts and questions for this chapter.

Quick answer
Organisation of data means arranging raw observations into ordered arrays, categories and frequency distributions to make comparisons easier. A frequency distribution shows counts for each value or class. Class marks are interval midpoints, relative frequency is class frequency divided by the total, and cumulative frequency adds frequencies across ordered classes. Well-designed classes should be nonoverlapping and cover all valid observations.
Key points
  • Raw data can be organised into arrays, categories and frequency tables for meaningful interpretation.
  • Classification can be qualitative, quantitative, chronological or geographical.
  • A frequency distribution records how often values or class intervals occur.
  • Class intervals must have clear endpoint rules and avoid overlaps or gaps.
  • Class width is upper minus lower boundary; class mark is their midpoint.
  • Relative frequency equals class frequency divided by the total; cumulative frequency adds successive counts.
  • Check totals, missing values and class widths because grouping can hide information or distort comparisons.

Use these notes alongside your current textbook. Check important formulas, worked answers and syllabus coverage with your teacher or official learning material.

Organisation of Data , Class 11 Economics

Original supplementary study guide for Statistics for Economics: arranging raw data, constructing frequency tables, class intervals, relative and cumulative frequencies, and interpreting distributions. Includes 40 worked examples.

Meaning of organisation of data

Organisation of data is the process of arranging observations into meaningful groups, tables and summaries so that patterns can be understood.

Raw data

Raw data are observations in their originally collected form, before sorting, grouping or tabulation.

Need for organisation

A long unsorted list makes comparison difficult; grouping can show concentration, variation and differences between categories.

Statistical array

An array is a list of observations arranged in ascending or descending order.

Ascending order

Ascending arrangement lists observations from smallest to largest, including repeated values.

Descending order

Descending arrangement lists observations from largest to smallest.

Classification

Classification groups data according to shared attributes or measured values.

Qualitative classification

Qualitative classification groups observations by categories such as occupation, region or employment status.

Quantitative classification

Quantitative classification groups observations by numerical values such as age, income or expenditure.

Chronological classification

Chronological classification arranges data according to time periods, such as output by year.

Geographical classification

Geographical classification groups data by location, such as district or state.

Attributes and variables

Attributes identify qualities or categories; variables record characteristics that can take different values.

Discrete variable

A discrete variable takes separate countable values, such as the number of workers.

Continuous variable

A continuous variable can take values across an interval, such as height or travel time, within measurement precision.

Nominal scale

Nominal categories have no inherent ranking, such as modes of transport.

Ordinal scale

Ordinal categories have meaningful order, such as low, medium and high satisfaction, but intervals need not be equal.

Frequency

Frequency is the number of observations in a category, value or class interval.

Frequency distribution

A frequency distribution lists distinct values or classes alongside their counts.

Ungrouped frequency table

An ungrouped frequency table reports counts for individual values, useful when the number of distinct values is small.

Grouped frequency table

A grouped frequency table combines numerical observations into class intervals to simplify larger datasets.

Tally marks

Tally marks record each observation against its category or class, often in groups of five for easier counting.

Class interval

A class interval is a range used to group numerical observations, with specified endpoint rules.

Class limits

Class limits are the stated endpoints in a class label; their interpretation depends on inclusive or exclusive conventions.

Class boundaries

Class boundaries are the actual dividing values between adjacent continuous classes, ensuring observations are allocated consistently.

Class width

For continuous boundaries, class width equals upper boundary minus lower boundary.

Class mark

Class mark or midpoint equals (lower boundary + upper boundary)/2.

Exclusive method

Under the exclusive method, a class such as 10, 20 includes 10 but excludes 20; 20 belongs to the next class.

Inclusive method

Under an inclusive convention for integer observations, a class labelled 10, 19 includes both 10 and 19.

Inclusive-to-continuous conversion

For whole-number measurements recorded to the nearest unit, adjacent classes 10, 19 and 20, 29 can be represented with boundaries 9.5, 19.5 and 19.5, 29.5.

Mutually exclusive classes

Each observation must belong to no more than one class.

Collectively exhaustive classes

Every valid observation in the defined dataset should fit some class.

Open-ended classes

An open-ended class such as '60 and above' lacks a finite upper endpoint; its midpoint cannot be determined without assumptions.

Equal-width classes

Equal class widths simplify comparison and many graphical displays, but unequal widths can be appropriate in some settings.

Unequal-width classes

For unequal widths, comparing raw histogram heights can mislead; frequency density may be needed for graphical interpretation.

Number of classes

Choose enough classes to reveal structure without creating many empty or unstable categories; no single count is always correct.

Range

Range is maximum minus minimum and helps estimate the spread before selecting intervals.

Frequency total

The sum of all class frequencies should equal the number of valid observations counted.

Relative frequency

Relative frequency equals class frequency divided by total frequency.

Percentage frequency

Percentage frequency equals relative frequency multiplied by 100.

Cumulative frequency

Cumulative frequency sums frequencies successively across ordered classes.

Less-than cumulative frequency

Less-than cumulative frequency counts observations below successive upper class boundaries under the chosen convention.

More-than cumulative frequency

More-than cumulative frequency counts observations at or above successive lower boundaries under the chosen convention.

Frequency versus cumulative frequency

A class frequency counts observations in one class; cumulative frequency counts across multiple classes up to or beyond a boundary.

Bivariate classification

Two-way tables classify observations by two characteristics, such as location and employment status.

Contingency table

A contingency table shows joint category counts, row totals, column totals and a grand total.

Missing data

Missing values should be identified separately rather than automatically assigned to zero or a category.

Outliers

Extreme observations may affect the range and grouping; investigate possible errors before excluding them.

Coding categories

Use consistent labels and a codebook; numeric codes for categories should not be treated as meaningful quantities.

Choosing boundaries

Use clear, nonoverlapping boundaries and specify how exact endpoints are treated.

Organising economic data

Income groups, price bands, household sizes and employment categories are common applications in economics.

Data confidentiality

When working with household data, publish aggregated tables and avoid disclosing identifying individual records.

Interpretation of tables

Identify the largest class, relative shares, totals, coverage and units before drawing conclusions.

Limitations of grouping

Grouping loses individual detail; different class widths and boundaries can change the apparent shape of a distribution.

Checking tables

Verify counts, totals, class inclusion, percentage sums and treatment of missing values.

Exam presentation

Give tables descriptive titles, variable units, explicit class rules and totals; show calculations before interpretation.

Revision checklist

Practise arrays, classifications, tallies, grouped tables, class limits and boundaries, class marks, relative and cumulative frequencies.

Worked frequency table

Consider observations 2, 4, 7, 11, 14, 18, 19, 21, 24, 27. Using exclusive classes 0, 10, 10, 20 and 20, 30 gives frequencies 3, 4 and 3. Relative frequencies are 0.30, 0.40 and 0.30. Less-than cumulative frequencies are 3, 7 and 10. Class marks are 5, 15 and 25. All frequencies sum to 10.

Worked example 1: Ascending array

Sort 9, 3, 7, 3, 5 into 3, 3, 5, 7, 9.

Worked example 2: Descending array

Sort 2, 8, 5, 8 into 8, 8, 5, 2.

Worked example 3: Ungrouped frequency

For 2, 3, 3, 5, 5, 5, frequency of 5 is 3.

Worked example 4: Total observations

Frequencies 2, 4, 3 and 1 sum to 10 observations.

Worked example 5: Relative frequency

Frequency 3 out of 10 gives 3/10 = 0.30.

Worked example 6: Percentage frequency

Relative frequency 0.30 corresponds to 30%.

Worked example 7: Exclusive endpoint

For classes 0, 10 and 10, 20, a value of 10 goes in 10, 20.

Worked example 8: Inclusive endpoint

For integer classes 10, 19 and 20, 29, a value of 19 belongs to the first class.

Worked example 9: Continuous boundary conversion

For integer classes 10, 19 and 20, 29, boundaries can be 9.5, 19.5 and 19.5, 29.5.

Worked example 10: Class width

A continuous class with boundaries 20 and 30 has width 10.

Worked example 11: Class mark

For interval 20, 30, midpoint = (20+30)/2 = 25.

Worked example 12: Class mark with boundaries

Boundaries 9.5 and 19.5 give midpoint 14.5.

Worked example 13: Range

Observations 4, 8, 12, 19 have range 19−4 = 15.

Worked example 14: Equal intervals

Classes 0, 10, 10, 20, 20, 30 each have width 10.

Worked example 15: Frequency distribution construction

For 2, 4, 7, 11, 14, 18, classes 0, 10 and 10, 20 have frequencies 3 and 3.

Worked example 16: Check total

The two class frequencies 3 and 3 total 6, matching six raw observations.

Worked example 17: Tally groups

Seven responses can be tallied as one group of five plus two more marks.

Worked example 18: Less-than cumulative

Frequencies 2, 3, 5 yield cumulative counts 2, 5, 10.

Worked example 19: More-than cumulative

For successive classes with frequencies 2, 3, 5, counts at or above their lower boundaries are 10, 8, 5.

Worked example 20: Cumulative last value

For a complete ordered table of 25 observations, final less-than cumulative frequency is 25.

Worked example 21: Cumulative percentage

Cumulative count 12 out of 20 corresponds to 60%.

Worked example 22: Modal class

Frequencies 4, 9 and 7 make the second class the modal class.

Worked example 23: Class share

A class containing 8 of 40 households has share 20%.

Worked example 24: Percent total

Class shares 25%, 35% and 40% total 100%.

Worked example 25: Open-ended class

Class '₹50,000 and above' has no finite upper boundary and no uniquely determined midpoint.

Worked example 26: Unequal widths

Classes 0, 10 and 10, 30 have widths 10 and 20.

Worked example 27: Frequency density

Frequency 10 over width 5 gives density 2 observations per unit.

Worked example 28: Density comparison

Frequency 12 in width 6 and frequency 10 in width 2 yield densities 2 and 5 respectively.

Worked example 29: Chronological table

Yearly output 2024: 100, 2025: 110, 2026: 120 is chronological classification.

Worked example 30: Geographical table

Sales by Rajkot, Surat and Ahmedabad is geographical classification.

Worked example 31: Qualitative categories

Transport categories bus, train and bicycle are nominal groups.

Worked example 32: Ordinal categories

Ratings poor, fair, good, excellent have a meaningful order.

Worked example 33: Discrete variable

Number of siblings 0, 1, 2, 3 is discrete.

Worked example 34: Continuous variable

Travel time measured as 12.4 minutes is continuous in the conceptual model.

Worked example 35: Two-way table

Urban employed 30, urban unemployed 10, rural employed 20, rural unemployed 15 gives total 75.

Worked example 36: Row total

For urban counts 30 employed and 10 unemployed, urban row total is 40.

Worked example 37: Column total

Employed counts 30 urban and 20 rural give employed column total 50.

Worked example 38: Missing response

If one of 20 people skips an income question, valid income responses total 19, not 20.

Worked example 39: Boundary overlap

Classes 0, 10 inclusive and 10, 20 inclusive both include 10 and are not mutually exclusive.

Worked example 40: Grouped-data information loss

Knowing five households fall in ₹10,000, ₹20,000 does not reveal each exact income.

Formula bank

Range = maximum−minimum. Class width = upper boundary−lower boundary. Class mark = (lower boundary+upper boundary)/2. Relative frequency = class frequency/total observations. Percentage frequency = relative frequency×100. Less-than cumulative frequency = sum of frequencies through the given class. Frequency density = frequency/class width when widths differ.

Practice MCQs

1. A sorted list of observations is (a) array (b) index. Answer a. 2. Class mark of 10, 20 is (a) 10 (b) 15 (c) 20. Answer b. 3. In exclusive classes 0, 10 and 10, 20, value 10 belongs to (a) first (b) second. Answer b. 4. Relative frequency is (a) f/N (b) N/f. Answer a. 5. The final less-than cumulative frequency equals (a) sample size (b) class width. Answer a. 6. A categorical variable with ranked labels is (a) nominal (b) ordinal. Answer b.

Short-answer practice

Q1: Differentiate raw data and an array. Q2: Explain qualitative and quantitative classification. Q3: Distinguish class limits and boundaries. Q4: Define frequency and relative frequency. Q5: Explain inclusive and exclusive class conventions.

Long-answer practice

1. Construct an ungrouped frequency distribution for 1,2,2,3,3,3,4,4,5. 2. Form a grouped frequency table for 4,7,12,15,18,21,24,28 using classes 0, 10,10, 20,20, 30 and calculate cumulative frequencies. 3. Explain steps for selecting suitable classes and handling endpoints. 4. Prepare a two-way table of location and employment status from a small dataset. 5. Discuss how grouping can conceal outliers and within-class variation.

Common mistakes

Do not count a boundary value twice. Do not confuse class limits with true boundaries. Do not use a class midpoint for an open-ended class without an assumption. Check that the sum of frequencies matches valid observations. Missing values are not zero. With unequal class widths, raw histogram heights should not be compared without considering density.

Revision checklist

Sort raw observations, build tallies, verify totals, define interval rules, calculate width and class mark, relative and cumulative frequencies, and interpret grouped tables with correct units.

Source and scope note

Original supplementary notes, not an official NCERT textbook reproduction or verified numbered exercise solutions. Exact CBSE 2026, 27 examinable topics and prescribed textbook-edition alignment require separate verification. References: https://cbseacademic.nic.in/curriculum_2027.html and https://ncert.nic.in/textbook.php.

Frequently asked questions

What is organisation of data?

Arranging observations into meaningful orders, categories and frequency tables for analysis.

What is a frequency distribution?

A table showing how many observations fall into each value or class interval.

What is the difference between inclusive and exclusive classes?

Inclusive integer classes include both stated endpoints; exclusive classes include the lower endpoint but exclude the upper endpoint.

How do you calculate class mark?

Add the lower and upper class boundaries and divide by two.

What is relative frequency?

The class frequency divided by the total number of valid observations.

What is cumulative frequency?

The running sum of frequencies across ordered classes.

What is a statistical array?

A set of observations arranged in ascending or descending order.

Are these official NCERT exercise solutions?

No. They are original supplementary explanations and examples; textbook-specific exercise alignment requires separate verification.

AVAILABLE FOR ANDROID

Start Studying with Krutsha AI Tonight

Join Class 8 to 12 CBSE & NCERT students mastering complex topics. Instant photo doubt solving, zoomable diagram notes, mock tests, and daily WhatsApp updates for parents.

Free daily doubt credits
Class 8th to 12th CBSE & NCERT
Instant setup
Krutsha AI AskAI Instant Doubt Solver
Krutsha AI 4-Step Chapter Learning Hub
Krutsha AI Quiz AI Analysis Report
Krutsha AI Student Leaderboard and Streaks